XTOOL X100 PAD3 SE Car Key Programmer Support EU/RU/Brazil Local Dealer Car Full System Diagnostic Tool All Key Lost Free Update

1. 100% Original XTOOL X100 PAD3 SE
2. Ship in 48 Hours
3. 24 hours After sales service
4. Remotely and Lifetime Technical Support
5. Contact us to get VIP Price

OE Level All Systems Diagnostics

X100 PAD3 comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

* Read Codes: including manufacturer-specific codes, pending codes, permanent codes
* Clear Codes: Clear codes, reset monitors and turn off warning lights
* Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature and etc.
* Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.

31+ Services Functions

XTOOL X100 PAD3 SE Automotive Diagnostic Scan Tool comes with 23 stand-alone service options under “Common Service” and various resets, relearns, adaptations, matchings, initializations, calibrations under “Diagnosis” menu.

Oil Reset: Perform reset for a new calculation of engine oil life system once changed the oil.

EPB Reset: Maintain the electronic braking system safely and effectively.

SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.

BMS Reset: Register the newly replaced car battery into the car domputer.

Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.

ABS Bleed: Bleed the air out of the ABS system for firm brake pedals.

EEPROM Adapter: Read EEPROM data when OBD method is not available.

Other service options includes A/C Relearn, HV Battery, VGT, EGR, TPMS Reset, Cylinder, Throttle, Electronic Pump Activation, Gear Learning, Windows Initialization, Seat Calibration, Gearbox Match, Tire Upgrade, Transport Mode, Headlight, EPS, DPF, Suspendion, Cylinder, Airbag Reset, etc.

Note: Service & Resets do NOT work on all cars. Please come to us with VIN number, vehicle make, model, year to check compatibility before purchase.

IMMO FUNCTIONS & KEY PROGRAMMING

This key programming scan tool set comes with X100 PAD3 SE diagnostic tablet, EEPROM Adapter, KC-501 key programmer, M821 and KS-1 key programmer (for Toyota & for Lexus All_Keys_Losst). This tool set can perform advanced IMMO keys & key chip programming functions that is second to none in the market:

* Read PIN code, Add Transponder Key, Add Smart Key, Disable Lost Keys, Remote Learning

M821 Mercedes-Benz All Keys Lost Communication Adapter is used for finishing and optimizing all key lost programming for Mercedes-Benz modules.

With M821 Adapter, you can save as much as 65% of the calculation time on the process, or save you from plugging the key emulator in and out for hundreds of times.

Note:

M821 Adapter needs to be used with advanced XTOOL Key Programming Devices

eg: D8/D8BT, X100 PAD3/X100 PAD3 SE, Inplus IK618, A80/A80 PRO/A80 PRO Master, D9/D9 PRO, X100 MAX  and KC501 Key Programmer.

1. Connect KC501 to the device via USB.
2. Connect Mercedes-Benz IR emulator onto KC501.
3. Disconnect the OBD2 connector from the main cable, then connect the device (or the VCI box) with the M821 Adapter using the main cable.
4. Connect 12V power supply onto the main cable.
5. Connect the EIS/EZS module with the M821 Adapter using the J1K02_BENZ cable. Please check the device for connection details.

Warm Tips:

1. Please check the pictures in the device when connecting M821 Adapter and EIS/EZS module via cable for BENZ .
2. The IR emulator for Mercedes-Benz should be plugged into the slot of the module when operating.
3. For devices which comes up with a VCI box, connect the M821 Adapter with the VCI box using the main cable, and keep the VCI box connected with the device via Bluetooth. You can check the connection details for such devices in the device.

Wide Vehicles Coverage

X100 PAD3 can access all vehicle systems of 80+ makes, 160+ brands, and 10000+ models to perform OE level diagnostics and IMMO key matching.Note: Please check compatiblity before order.

Diagnostic Report Printing & Sharing

X100 PAD 3 auto diagnostic scan tool enables diagnostic tech or mechanics to generate history diagnostic reports for sharing with customers by printing it out or sending it to customers via PDF.

14 Languages Supported

Arabic, German, English, Spanish, Finnish, French, Italian, Japanese, Korean, Polish, Portuguese, Russian, Traditional Chinese, Vietnamese (Pls note that the default language on scanner is English. Pls send us the S/N of the InPlus IP819 when you need to switch the language to another. Remember to update the language pack after we help you activated.)

2-Year Software Update

XTOOL X100 PAD 3 scanner comes 2 years free software update. You can added car models coverage, improve performance and capabilities within its fold for 2 years. You can still use the scanner normally even when the free updates period expires.

Auto VIN SCAN for Quick Diagnosis

Just need one click, you can scan your car’s detailed version information, also all diagnostic trouble codes and live data stream, freeze frame of full electrical control units.

NOTE: Auto VIN feature does NOT work on all cars. You can always navigate your vehicle manually.