XTOOL D9 PRO Full System Diagnostic Tool ECU Coding/Programming Bluetooth Diagnostic Scanner Support Doip & CAN FD All Key Lost

* Full System Diagnostics:

XTOOL D9 Pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules

* 42+ Maintenance Services:

XTOOL D9 Pro is designed for mechanics and workshop, garages. Along with the 42+ maintenance service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration,Reset control unit, Rain/Light Sensor, A/C Relearn, HV Battery, VGT Relearn, VIN write etc. Note: Service functions does not work on all vehicles.

* ECU Programming for Benz/ for BMW/ for VW +Flash Hidden Functions:

XTOOL D9 PRO support ECU programming for BMW, for Benz and for VW.  After replaced the existing software/firmware in the electronic control unit, program new ECUs, and fix software-controlled driving performance and emission issues.Reflash/reprogram hidden functions for ECM, TCM, BCM and other modules to customize your car is supported.

* Supports DOIP & CAN FD:

D9 Pro can works for the Doip protocol and CAN FD .CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)

* Module Topology Map:

Faster system-wide diagnostics with Topplogy Map for a clear view of the communication structure between modules, as well as all conditions per system tp read/clear codes, real-time data PID graphics for all vehicle systems.

* Active Test (Bi-Directional Control):

The XTOOL D9 PRO supports active Test / bi-directional control, allowing commands to be sent from a tablet to control vehicle modules and systems to perform specific functions and tests. Like Turn on/ off Windows/Doors/Wipers/Sunroof, Cycling ABS motor pump, EVAP Test, Component Match, etc.

* AutoScan & AutoVIN:

AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

* Top Hardware Configuration & 3 Years Software Update

Android 5.1 systems, 9.7'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 2G RAM & 64G. D9 pro come with 3 years free update. You could use the functions normally without upgrade after 3 years. Note: pls send me the serial number when you need upgrade after 3 years. This need pay the fee of updating.

* 14 Languages Supported: Support English, Spanish, Russian, Polish, German, Portuguese, etc.

* Bluetooth & USB Connection:

A variety of connection methods are convenient for users to enter the car or outside the car. (Bluetooth connection must not be more than 10m from the vehicle)

42+ Special Functions Supported:

► Oil Reset - Reset the oil life systems every time the oil and oil filter are changed;

►Battery Reset - Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.

► Key Programmer - Help ECU to recognize the new keys when you need to add new keys

► TPMS Reset - Tire pressure resetting is required to be performed after maintenance is performed;

► Gear Learn - Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

►Rain/Light Sensor - After replacing the front gear or replacing the rain/light sensor, you need to use the D9 PRO to re-match and learn the sensor. Also used to test sensors.

►A/C Relearn - operation data of the compressor is reset and self-learning is performed, and the position of the servo motor is reset and self-learning, which is used to detect and verify the fault location of the air conditioning system.

►HV Battery - When the new energy vehicle is faulty and repaired, it is necessary to ensure that the high-voltage battery has no power output. Through this function, the power output of the high-voltage battery to the vehicle can be disconnected, so that the maintenance worker can perform maintenance and inspection on the vehicle safely.

►Write VIN - The VIN information is stored in some important ECUs of the vehicle. After replacing the ECU, it is necessary to write the VIN number of the vehicle for verification and download the relevant ECU software. (After replacing the second-hand module, you need to flash the VIN)

D9 PRO also support Throttle Relearn, Disable Transportation, ABS Bleeding Headlight, Air Suspension, DPF, EEPROM Adapter, Reset control unit, VGT Relearn, Nox Reset, FRM Reset, EGR Relearn, AdBlue Reset, SRS, Clutch Adaption, Speed Limit, ADAS, etc

Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. XTOOL D9 Pro is equipped with advanced ECU coding function for addressing the following issues:

* After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
* By changing the code with the ECU coding, it’s easy to improve vehicle performance or stimulate high-end functions for the car.
* ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
* ECU Online Coding is available for BMW, for VW, for Porsche, for Renault, etc.

Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

ACTIVE TEST

❋ Turn on The Radiator Fan

❋ Modulate the Throttle

❋ Open/Close Windows

❋ Operate Mirrors

❋ Turn on/off The Lights

❋ Turn on/off The Sound Horn

❋ Test Door Lock

ABS Bleeding

After replacing the brake fluid/brake hose/brake cylinder/ABS pump/brake drum/brake oil can/brake oil level sensor, use the special function of self-venting of D9 PRO to drain. Thereby, the ABS system of the car can be restored to the best state and the driving safety can be ensured.

SAS Adjustment

After the vehicle has replaced the steering gear/sensor, it is necessary to use the diagnostic instrument to calibrate and learn the steering angle sensor to ensure that the vehicle runs in a straight line and the steering wheel automatically returns to straight.

Support DoIP Protocol: Compatible with BMW E/F/G Chassis, for Jaguar, for Land Rover vehicle makes

Support CAN FD Functions: Compatible with MY2020+ GM models

Auto VIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information, save your time.

8 in 1 Live Data Graph8 in 1 Live Data Graph

Helps you monitor changes in car data in real time,So that you can more accurately identify car problems.

8 in1 data flow display can greatly reduce the inspection time.

The latest APP above V4.25.4_6.36 supports intelligent topology mapping

• Comes with color-coded module status for quicker access to complete system diagnostics.

• Get a clear view of the communication structure between modules and everything about each system.

• One-key display of fault codes and direct access to system execution functions.

Note:

Topology Compatible with Universal, Compatible with Chrysler, Compatible with Jeep, Compatible with Dodge, Compatible with Ford, Compatible with Toyota, Compatible with Nissan, Compatible with Honda, Compatible with BMW, Compatible with Mercedes-Benz, Compatible with Hyundai, Compatible with Mazda (more coming soon). Not available for all vehicle brands.

14 Lnaguages Supported:

English, Spanish, Gemman, French, Italian, Finnish, Arabic, Japanese, Turkish, Polish, Portuguese, Vietnamese, Russian, Korean, Traditional Chinese

(please send us the S/N of the device and then we will help you authorize language, and you can free switch it)

One-Click Generate Health Report: 

Health Report will scan all vehicle modules and give you a status list for each modules condition. Also known as “Global Test” or “Full Scan” .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.

Extensive Vehicle Coverage - 200000+ Cars supported:

Aisa:

Compatible with (JAPAN) for Acura,

Europe:

Compatible with Vaz, for Porsche, for Maserati, for BMW, for Seat, for VW, for Audi, for Citroen, for Landrover, for Smart, for Renault, for Skoda, for Sprinter, for Land Rover, for Benz, for Fiat, for Opel, for Volvo, for Peugeot, for Ferrari, for Saab, for Gaz, for DR

USA:

Compatible with Gm, for USAFord, for Chrysler, for Willy;

Australia:

Compatible with Austford, for Holden;

Brazil:

Compatible with BXFiat, for BXGM