WIIYII M8 HUD Head Up Display Car OBD2 II EUOBD Overspeed Warning System Projector Windshield Auto Electronic Voltage Alarm

WIIYII M8 HUD Head Up Display Car OBD2 II EUOBD Overspeed Warning System Projector Windshield Auto Electronic Voltage Alarm

Display functions:

OBD2 EOBD Head-Up Display

HUD Main Functions

1.Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system),plug and play

3.Multi-color design makes the screen more abundant and easier to read

6.Rich Contents: speed,RPM, water temperature, voltage, instantaneous fuel consumption,average fuel consumption,driving distance measurement, voltage, shift reminders,fatigue driving reminders,low voltage alarm,high water temperature alarm,over speed alarm, engine failure alarm, eliminate the fault code,freely switch between kilometers&miles.

7. Autopower on/off:HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode,more easy to control HUD.

8. Automatic and manual brightness adjustment mode,driving without glare

Packing:1 X HUD 1 X Film Protector 1 X Cable 1 X TOOL

OBD2 EOBD Head-Up DisplayWithout turning head, the mount makes the driver safer

1.Ship From KR/RU/PL Local Warehouse

2.KR 3-5day / RU 5-10day / PL 5-10day

3.15-day Return with No Reason

4.3 Years Warranty

5.Shipping within 24hrs

80% of Accidents are Caused by Distraction Bow Your Head 3Seconds = Drive a Car 50 Meters Blindly

FRONT VIEW HUD YOU CAN VIEW

navigation and information at eye level instead of looking down repeatedlyto ensure safer driving

Display function

Driving speed / Engine RPM / Instant voltage / Water temperature

Diving mileage / Auto photosenstive brightness / Alarm Sound Switch / КМ/МРН switch

Water Temperature progress bar display / Auto Switch

AlarmFunction

Speed alarm / Single segment alam setting / Voltage alam / Water temperature alarm

4-segment alarm setting / Voltage alarmalue setting / water temperature alarm value setting / Off time setting

Four Kinds of Practical Driving data at a Alance

Dial key to open the key direction of the move can be switched at will

1.Normal mode-Speed/Engine RPM Decorative lighting

2.High speed mode-Speed/Engine RPM

3.Mileage measurement -18.9 km from company to home

4.Simple mode-Speed

5.High speed mode-Speed/Decorative lighting

LIGHT SENSOR

HUD can automatically adjust the brightness according to the environment

MILEAGE UNIT

TRIP means the driving distance from engine start to off

Automatically a djust brightness

Configure sightseeing eleme nts to automatically adjust the brightness of the viewer according to the strength of the outside light so that it is clearly visible in bright light

Professional solution design

High-performance processing chip, strong performance and compatibility, dual-run internal training and dualcore processor to ensure the smooth unning.

Automatic on and off,power saving

HUD will automaticaly tums on and off along with engine operation, completely without hands-on operation, convenient and easy to save, saving power and energy savings

PC materials resistant to high temperature and cold

polymer polymer material, after hundreds of temperature resistance tests it can handle normal work under various temperature environments

Display during the day

clear during the day

Three step installation

1.Plug the OBD socket connector, sually under the steering wheel

2.Wire rod is inserted into A column sealing strip

3.Connect the OBD interface to HUD and lace HUD to the right place

What You See is What You Get

How to Install the HUD Car Computer:

1. Insert the product into the check port on the vehicle OBD computer;

2. Insert the other end of the product into the data interface of the host;

3. After the product is inserted into the host and the car is started, wait for the communication linkage between A202 and the car;

4. After the linkage is successfully established, the host will send a "drop" sound, at the same the display screen displays vehicle protocols and then indicates that it is the first time the product is used to set up parameters. (International universal OBD plug protocol definitions stipulated by SAE).

Common problem:

Q1: Why does it automatically turn off after a period of time?

A1: Its default sleep time is 30s, So when your engine is turned off, it will automatically turn off after 30s .please choose "Sleep Time Set" to set the sleep time.

Q2: Why my car dashboard lights or fault alarm lights are caused to be lit up abnormally?

A2: When used in some cars, car dashboard lights or fault alarm lights are caused to be lit up abnormally, choose"Product inf" -"Matching inf" to see the solution, and use needle-nose pliers to twist off excess pins to eliminate such phenomena.