UTV Drive Belt Replacement 3211180 Compatible with Polaris RZR XP / XP 4 1000 S 1000 General 999cc 2015-2021

**Notice: KEMIMOTO parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Polaris Industries,BRP, HONDA,YAMAHA.

The engine is equipped with many mechanical accessories, such as alternator, water pump, power steering pump, and air conditioning compressor.
The belt is the component that drives all these accessories. The belt itself is driven by a pulley connected to the engine crankshaft.
In most cars, the belts are changed between 40,000 and 70,000 miles. Water, road dirt, excessive heat, and oil leakage can cause premature belt damage. If the drive belt breaks, it will be impossible to drive the vehicle.

product description

Condition: 100% Brand New
Material: Chloroprene rubber + Aramid String Cord
OE Part Number: 3211180

product features

1. Made of high-quality neoprene rubber and advanced aramid thread, it has high-temperature resistance, fire resistance, light weight, high strength, dimensional stability, puncture resistance, abrasion resistance, chemical corrosion resistance, and good mechanical properties And other advantages, durable
2. It wears evenly, reduces belt failures, and can provide you with the required performance and durability even under the most demanding conditions
3. The belt has minimal stretch under load, which can provide stable variable speed RPM

suitable models

2015-2022 Compatible with Polaris RZR XP 1000
2015-2022 Compatible with Polaris RZR XP 4 1000

2016-2020 Compatible with Polaris RZR S 1000
2020-2022 Compatible with Polaris RZR Trail S 1000

2020-2021 Compatible with Polaris General XP 1000

package Included

1*Drive Belt

HOW TO EXTEND BELT LIFE?

Break-in right and calm down correctly.
Increase the speed limit washer to prevent the main clutch from closing too far at high speed, thereby preventing the secondary clutch from opening too far and the belt from falling onto the clutch shaft.
Check whether the two clutches are aligned, if not, use a clutch alignment tool to help straighten the clutch.
Keeping the clutch clean will help improve performance and avoid clutch and belt wear.
Adjust your driving style, and don’t make violent accelerations on surfaces that are subject to a lot (such as sand and dirt).
Regularly check whether the vent of the CVT box is inserted.

HOW TO BREAK IN AND COOL DOWN CORRECTLY?

The most important, break in a new CVT belt will result in a cooler-running belt maximized life and performance.

Drive your UTV in two-wheel high for 20 minutes between 25-45 mph (40-72 km/h)in flat terrain, avoiding hard accelerations and hills.
Shift the belt through the normal operational range by varying your UTV speed and engine RPM. But do not exceed ¾ throttle during break-in. Avoid excessively fast instantaneous speed causing belt slippage.
In extremely cold weather, extend the break-in time by 5-10 minutes to make the belt warm up optimally.
After 20 minutes of driving, let the unit cool down for 30 minutes after turning off the engine.
Repeat the above thermal cycle steps, turn the unit OFF and allow the belt to cool down again for 30 minutes.

Detail Models(for RZR/ for GENERAL)

●For RZR
○2015-2016 RZR XP 1000 EPS / 4 Seaters
○2016 RZR S 1000 EPS
○2016 RZR XP Turbo EPS
○2016 RZR XP 4 1000 EPS High Lifter
○2017 RZR XP 1000 EPS / 4 Seaters
○2017-2018 RZR S 1000 EPS
○2018-2020 RZR XP 1000 / 4 Seaters
○2019 RZR S 1000
○2019 RZR XP 1000 Trails & Rocks Edition
○2019 RZR XP 1000 DYNAMIX Edition / 4 Seaters
○2019 RZR XP 1000 High Lifter Edition / 4 Seaters
○2019 RZR XP 1000 Ride Command Edition / 4 Seaters
○2020 RZR Trail S 1000
○2020-2022 RZR XP 100 Trails & Rocks
○2020-2022 RZR XP 1000 High Lifter / 4 Seaters
○2020-2022 RZR XP 1000 Premium / 4 Seaters
○2021-2022 RZR Trail S 1000 Premium
○2021-2022 RZR Trail S 1000 Ultimate
○2021-2022 RZR XP 1000 Sport
●For GENERAL
○2020-2021 General XP 1000 Deluxe / 4 Seaters
○2020-2021 General XP 1000 / 4 Seaters
○2021 General XP 1000 Pursuit Edition / 4 Seaters
●OE Number Match:
Compatible with Polaris Belt for 3211180.
KEMIMOTO RZR drive belt constructed with double-cog designs.
For an exact match to the OE Number belt.

**Notice

This item is not a licensed Honda/Yamaha/Polaris/Can Am/Kawasaki/CF Moto/BRP product. We do not claim ownership and have no affiliation with Honda/Yamaha/Polaris/Can Am/Kawasaki/CF Moto/BRP. Any Honda/Yamaha/Polaris/Can Am/Kawasaki/CF Moto/BRP copyrights and trademarks belong to the respective owners. Unless specifically identified as such, our use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between us and Honda/Yamaha/Polaris/Can Am/Kawasaki/CF Moto/BRP. Any references by us (or company name) (or the seller) to third party trademarks is to identify the corresponding third party's goods and shall be considered nominative fair use under the trademark law.