THINKSCAN Plus S2/S4/S7 Car Diagnostic Tool OBD2 Automotive Scanner Professional Mulit-system Obd 2 Code Reader Scanner For Auto

Why Do You Need THINKSCAN Plus S Series?

★Display:5 inch MIPI LCD Screen

★Large Capacity:1G RAM+16G ROM

★System Diagnostic Function:3-7 System Diagnostic Lifetime Free

★Resets Service:2-5 Optionals Resets Lifetime Free

★OBDII Function:All 10 OBDII Lifetime Free

★Upgrade:WIFI Upgrade Lifetime Free

★Language:Russian,English,French,German,Italian,Spanish,Portuguese,Japanese,Polish,Turkish

★Purchase Extra Resets Services:29.95$/Year/Reset

What Difference Between Plus S2/S4/S7?

★S2:Support ABS,SRS,ECM 3 Systems Lifetime Free;2 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)

★S4:Support ABS,SRS,ECM,TCM,BCM 5 Systems Lifetime Free;3 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)

★S7:Support ABS,SRS,ECM,TCM,BCM,AC,IC 7 Systems Lifetime Free;5 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)

7 System Engine/Airbag/ABS/BCM/TCM Diagnosis Lifetime-Free Update(Optional):

1.Engine System:By Reading,Clearing DTCs and viewing Live Data Stream,the thinkscan plus obd2 tool can help you easily pinpoint the cause of the engine system problem and turn off the warning light related,thus ensuring the engine works properly,and enhancing its performance.

2.ABS System:By accessing to ABS system to view its Live data stream,and retrieving the fault codes.This ThinkScan reader scanner can troubleshoot the ABS issue,with a visual inspection of all brake components that caused the warning light,and turn the light off.

3.SRS System(Airbag):By detecting every electronic parameters in SRS system to check their health status,this diagnostic tool can address the SRS potential issues timely to ensure your driving safety,and turn off the warning light of Airbag.

4.TCM Transmission System:By checking the Transmission system,this tool can figure the problem out via reading codes,or check the health status via live data viewing,and turn off the warning light,making sure that the right amount of power goes to the wheels to drive at a given speed.

5.BCM System:The BCM system collects the above information and outputs the corresponding control output (lights,windows,wipers and cleaning,etc.),load failure detection

6.AC System:The air-conditioning system can make certain places obtain air with a certain temperature,humidity and air quality to meet the requirements of the production process and improve labor hygiene and indoor climate conditions.

7.IC System:The instrument system detects the cause of the fault and turns off the fault light

Professional Diagnostic Scanner for Car that Fits Your Needs-28 Maintenance Service(Optional 3-5 Resets Lifetime Free):

You can choose 3-5 for lifetime-free from following 28 Rest Function Options.

If you need more special functions, you need to pay an additional 29.95 dollars /year /reset.

1.Oil Lamp Reset Service

To reset your oil service after changing the oil or simply resetting your vehicle inspection warning light(please make sure your vehicle is in good condition).The scanner helps you to reset the service lamps on the instrument cluster.

2.EPB Electronic Park Brake Reset

It is a technology that realizes parking brakes by electronic control.This OBD2 scanner is an essential tool required to release the rear electric parking brake unit when replacing rear pads or discs so that the caliper piston can be moved back.It can also clear codes and turn off the EPB light when it’s done.

3.BAT battery service

Evaluate the battery charge state,monitor the close-circuit current,register the battery replacement,and activate the rest state of the vehicle.Not all vehicles need to do the battery reset after changing batteries.

4.DPF Diesel Particulate Filter Reset

it is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance

DPF regeneration may be performed in the following cases:

a)The exhaust back pressure sensor is replaced

b)The PM trap is removed or replaced

c)The fuel additive nozzle is removed or replaced

d)The cataytic oxidizer is removed or replaced

e)The DPF regeneration MIL is on and maintenance is performed

f)The DPF regeneration control module is replaced

5.SAS Steering Angel Sensor Reset

To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

6.TPMS Tire Pressure Monitoring System Reset

This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU,as well as to perform TPMS replacement and sensor test.

a)After the tire pressure MIL turns on and maintenance is performed,the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL warning light.

b)Tire pressure resetting must be performed after maintenance performed in the following situations:

tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced,tire pressure sensor is damaged,or tire is replaced for the car with tire pressure monitoring function..

7.IMMO Key Programming

The unique car key programming and read pin code function,it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding

When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox(Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY.Start the car and drive.Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern.After you follow this programming method of the TCU/ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System(at night with the Bi-Xenon headlights) it swivels either side,pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled.Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.In an electronically fuel injected car,a throttle position sensor and air flow sensor communicate with the computer,which supplies the corresponding amount of fuel needed at the injectors.It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

This function can be used for EGR valve (exhaust gas recycled) cleaning or self-learning after replacement.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality.When the gearbox is disassembled or repaired (after some of the car battery is powered off),it will lead to shift delay or impact problem. In this case,this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust.lf the Nox fault is re-initialized and the Nox catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.Cluster Reset

a)Cluster reset is to copy,write,or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable,so that the odometer shows the actual mileage.

b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure,it

is necessary to do cluster reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.