ID: 10012668

Romondes SM603 Car Smoke Leak Tester EVAP Smoke Machine Automotive Leak Detector Fuel Pipe Leakage Locator for Car Motorcycle

5.0 (10 Phiếu) | 48 Đơn
Old Price: $344.98 - 362.23
Price:
$241.48 - 253.55 USD
Ships From
Ship to:
United States
via:
Estimated Delivery: 7 - 35 days
Shipping cost: $0.00
Quantity

Estimated total price: $ -- USD

What SM603 EVAP Smoke Machine Leak Tester Can Do for You?

Normally, 60% of engine fault codes are related to pipes. The majority of pressure problems are caused by a failure of a leak somewhere. SM603 automotive smoke machine leak detector uses the most advanced 5th generation technology, the principle of isolated heat conduction, by checking the sealing of the vehicle's pipework to help you quickly and accurately determine if a fault is caused by a pipe leak.

Full system diagnosis, no leak is missed!

With this EVAP smoke machine leak tester, you can detect Crankcase System, Intake System, Exhaust System, Fuel Tank System, EVAP System, EGR System, Throttle Shafts, Engine Block, Turbo Test System, Cooling System Test, Various Pipe Fittings Test, etc.

✔️Car Sealing Test: Car seals are a simple device used to lock or 'seal' a valve in the open or closed position to prevent unauthorized operation of the valve.Poor airtightness of the car may lead to inability to keep warm dusty, not soundproof, and not waterproof ,etc.

✔️Fuel Tank System Test: A fuel tank (also called a petrol tank or gas tank) is a safe container for flammable fluids.When there is a gap in the fuel tank and piping caused by improper installation, it will cause leaks in the fuel tank system.

✔️Exhaust System Test: The exhaust system is made up of several components that work together to reduce exhaust noise and provide a conduit for exhaust gases to exit the engine by making their way out beneath the vehicle.When leaks happened in the exhaust, unpurified harmful gases to be discharged into the atmosphere and generate vehicle noise.

✔️EVAP System Test: The Evaporative Emission System (EVAP) is designed to store and dispose of fuel vapors before they are released into the atmosphere.Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.Meanwhile it will Help you pass the EVAP Test and meet vehicle emission standards.

✔️Intake System Test: An intake system is described for connecting a carburetor and a combustion chamber of internal combustion engines. Leakage in the air intake system will lead to insufficient intake of the car engine.

✔️Crankcase System Test: The crankcase is the "body" that holds all of the other engine parts together. It's the largest part of the engine.Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

✔️Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. Note: Not applicable to air conditioning system piping.

SM603 car smoke machine has pressure Gauge, flow indication and flow control, help you detect leaks better!

✔️System Pressure Gauge: the Pressure Gauge displays the output of pressure of the machine if block the smoke outlet port,otherwise it shows the real time pressure of the system been testing.

✔️Pressure Decay Tesing: this gauge can also be used to determine if a leak exists by switching of the air control while the system is uner pressure.if the guage holds the displayed pressure.if the gauge holds the displayed pressure,there is on leakage.if the displayed pressure starts drops,there is leakage in the system.

● No Leak: Flow Meter drop to "0"and pressure reading raise to Max
● Small Leak: Flow Meter stay between 0.1 to 0.5LPM.
● Massive Leak:Flow Meter raise and pressure reading drop to "0".

Flow meter indicates the leak size:

● P0456, the meter should be at 0.1 LPM EVAP for a .020 leak standard
● P0442, the meter should be at 0.5 LPM EVAP for a .040 leak standard

Output pressure: 0.5PSI
Output Volume:< 8LP M
Power Supply: DC12V
Current: 5AMP
Power Cord: 2.5 Meter
Smoke Hose: 2.5Meter.

Romondes SM603 How to do leakage test?

Step 1: Mount the hook and shop air adapter to the SM603 smoke leak detector, plug the power cord into the socket.

Step 2: Fill 20ml(Baby Oil) smoke oil into the SM603 auto smoke machine, from refill port on the top. Note: The oil level shall not exceed the level gauge.

Step 3: Connect shop air supply, connect 12V vehicle power, introduce shop air to the SM603 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then SM603 smoke automotive will start to generate smoke.

Step 4: In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. Note: If your smoke machine's fumes are discharged from the top of the machine: please turn on the gas switch first, then power on.

? Warm Tips:

● The oil level shall not exceed the level gauge and please do not exceed 15 ml when adding new oil later.

● Please do not to operate the SM603 EVAP system smoke machine continuously for more than 8 minutes.

● Before refilling new oil, please pour out the remaining oil in the detector, drain the old oil and then add new oil.

● Use Baby Oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.

● To ensure the safety of people and vehicles, the engine does not need to be ignited during use.

● If your smoke machine's fumes are discharged from the top of the machine: please turn on the gas switch first, then power on.

Overheat & Anti-Frost Protection

● Overheat Protection:When the temperature of the device exceeds 120℃,power protection will be intelligently activated to turn it off.

● Anti-frost Protection:The device can also work normally at -20℃

Wide Range Of Applications:

Romondes SM603 Diagnostic Leak Detector can compatible with cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, beach bikes and speedboats and more. It is a universal smoke tester.

Smoke Leak Detector Makes Car Repair Easier and More Economical!

Crankcase Air Leakage, Leaking Fuel Tank, Poorly Closed Values, Throttle Leak, Leaking Fuel Tank, Door&Windows Seals, Intercooler Air Leak, Smoke Rats Out of Pipes.

The Function of Operation Components of the Vacuum Smoke Machine

A - Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.

B - Velcro Strap: For collection of the smoke delivery hose, and power cord before storage.

C - Smoke Outlet Port: While set up the unit, the Smoke Delivery Hose need to be mounted onto the Smoke Outlet .

D - Power Socket: While set up the unit, the power cords need to plug into the power socket.

E - System Pressure Gauge: The Pressure Gauge displays the output pressure of the machine if block the smoke outlet port, otherwise it shows the real time pressure of the system been testing.

F - Flow Meter: The purpose of the flow meter is to provide a quick visual indication of the amount of smoke passing through the system being tested. If the smoke nozzle is in a closed system, and there are no leaks in that system, the flow meter will read zero (ball at bottom of scale). As the system is filled with smoke, the ball in the flow meter will slowly fall to the bottom of the scale as the pressure in the system equalizes to the output pressure of the unit. As the flow decreases, the output pressure will increase. If the flow meter ball never falls to the bottom of the scale, there is leakage or air passing through the system.

G - Flow Dial: The purpose of the Flow Control Valve is to decrease the amount of smoke exiting a leak so that its position may be pinpointed without the masking effect of excessive smoke. Turn clockwise to decrease flow, counterclockwise to increase flow. This valve is also used to lock out the system under test and observe any pressure decay on the pressure gauge.

H - Oil Level Gauge: While set up the unit, smoke oil need to be filled into the unit, do not exceed the MAX line. Check and confirm proper oil level periodically. If the oil level is lower than the MIN line,the unit would need a refill.

Product Package:

1*SM603 EVAP Smoke Machine Tester
1*Smoke Delivery Hose
1*Intake Adapter
1*EVAP Service Port Adapter
1*EVAP Removal Tool
1*Power Cord
1*Hook

? Use Attention

If you have the following problem, please don't be anxious, it may be caused by incorrect operation, so please follow the correct way first.

Oil smoke is coming out from inside the housing or from the top of the machine.

Correct operation: you need to turn on the gas switch first and then power on. Use gas first to determine whether there is a leak, there is no leakage, there is no need to smoke. Even if there is a leak, before injecting smoke should also open the distal interface of the pipeline being tested until there is smoke and then plugged, so that the smoke quickly filled with the system being tested

Smoke leak detector tube is melted and leaking oil.

The SM603 automotive smoke machine has overheat protection, but the temperature protection is triggered at the bottom line of the heater wire to prevent overheating of the external fire. Under normal ventilation conditions, the tube will not melt unless the air supply is turned off or the system is being tested. So when testing you need to pay attention to the state of the flow meter and not keep running the equipment, which will cause the temperature to keep rising and the gas will not take away the heat without flowing.

The plastic cover on the top of SM603 melts when you use it?

The SM603 smoke tester automotive can measure smoke very quickly, so when the smoke comes out, you can stop using the device and do not need to continue operating it.

Recommended: Ancel S3000 With Air Compressor

*Note: Like most EVAP smoke machines in the market, SM603 smoke leak detector need to connect air supply.
If you want an car smoke machine with its own air supply, we would recommend ANCEL S3000 which has its own air compressor.



  • Origin: Mainland China

VẬN CHUYỂN VÀ GIAO HÀNG

Chúng tôi tự hào cung cấp dịch vụ vận chuyển quốc tế hiện đang hoạt động tại hơn 200 quốc gia và hải đảo trên toàn thế giới. Không có gì có ý nghĩa hơn đối với chúng tôi ngoài việc mang lại cho khách hàng những giá trị và dịch vụ tuyệt vời. Chúng tôi sẽ tiếp tục phát triển để đáp ứng nhu cầu của tất cả khách hàng, mang đến một dịch vụ vượt ngoài mong đợi ở mọi nơi trên thế giới.

Bạn vận chuyển các gói hàng như thế nào?

Các gói hàng từ kho của chúng tôi ở Trung Quốc, Việt Nam sẽ được vận chuyển bằng ePacket hoặc EMS tùy thuộc vào trọng lượng và kích thước của sản phẩm. Các gói hàng được vận chuyển từ kho hàng tại Hoa Kỳ của chúng tôi được vận chuyển qua USPS.

Bạn có giao hàng trên toàn thế giới không?

Có. Chúng tôi cung cấp dịch vụ vận chuyển miễn phí đến hơn 200 quốc gia trên thế giới. Tuy nhiên, có một số địa điểm chúng tôi không thể vận chuyển đến. Nếu bạn sống ở một trong những quốc gia đó, chúng tôi sẽ liên hệ với bạn.

Còn về Hải Quan thì sao?

Chúng tôi không chịu trách nhiệm về bất kỳ khoản phí tùy chỉnh nào sau khi các mặt hàng đã được vận chuyển. Bằng cách mua sản phẩm của chúng tôi, bạn đồng ý rằng một hoặc nhiều gói hàng có thể được vận chuyển cho bạn và có thể nhận được phí tùy chỉnh khi chúng đến quốc gia của bạn.

Thời gian vận chuyển là bao lâu?

Thời gian vận chuyển khác nhau tùy theo địa điểm. Đây là những ước tính của chúng tôi:

Vị trí * Thời gian vận chuyển ước tính
Việt Nam, Châu Á 10-30 ngày làm việc
Hoa Kỳ 10-30 ngày làm việc
Canada, Châu Âu 15-35 ngày làm việc
Úc, New Zealand 10-30 ngày làm việc
Mexico, Trung Mỹ, Nam Mỹ 25-55 ngày làm việc
* Không bao gồm thời gian xử lý 2-5 ngày của chúng tôi.

Bạn có cung cấp thông tin theo dõi không?

Có, bạn sẽ nhận được email sau khi đơn đặt hàng của bạn được giao có chứa thông tin theo dõi của bạn.

Theo dõi của tôi cho biết "Hiện tại không có thông tin".

Đối với một số công ty vận chuyển, mất 2-5 ngày làm việc để thông tin theo dõi cập nhật trên hệ thống.

Các mặt hàng của tôi có được gửi trong một gói không?

Vì lý do hậu cần, các mặt hàng trong cùng một giao dịch mua đôi khi sẽ được gửi theo từng gói riêng biệt, ngay cả khi bạn đã chỉ định hình thức vận chuyển kết hợp.

Nếu bạn có bất kỳ câu hỏi nào khác, vui lòng liên hệ với chúng tôi và chúng tôi sẽ cố gắng hết sức để giúp bạn.

HOÀN TIỀN & CHÍNH SÁCH TRẢ LẠI

Hủy đơn đặt hàng

Tất cả các đơn đặt hàng có thể bị hủy cho đến khi chúng được chuyển đi. Nếu đơn đặt hàng của bạn đã được thanh toán và bạn cần thay đổi hoặc hủy đơn đặt hàng, bạn phải liên hệ với chúng tôi trong vòng 12 giờ. Sau khi quá trình đóng gói và vận chuyển đã bắt đầu, bạn không thể hủy quá trình này nữa.

Hoàn lại tiền

Sự hài lòng của bạn là ưu tiên số 1 của chúng tôi. Do đó, nếu bạn muốn được hoàn lại tiền, bạn có thể yêu cầu bất kỳ lý do nào.

Nếu bạn không nhận được sản phẩm trong thời gian đảm bảo (60 ngày không bao gồm quá trình xử lý 2-5 ngày), bạn có thể yêu cầu hoàn lại tiền hoặc đổi hàng.

Nếu bạn nhận được sai mặt hàng, bạn có thể yêu cầu hoàn lại tiền hoặc đổi hàng.

Nếu bạn không muốn sản phẩm mà bạn đã nhận, bạn có thể yêu cầu hoàn lại tiền nhưng bạn phải trả lại mặt hàng đó với chi phí của bạn và mặt hàng đó phải được sử dụng.

  • Đơn đặt hàng của bạn không đến được do các yếu tố trong tầm kiểm soát của bạn (tức là cung cấp địa chỉ giao hàng sai)
  • Đơn đặt hàng của bạn đã không đến do những trường hợp ngoại lệ nằm ngoài tầm kiểm soát của Sinaparts - Automobile & Motorcycle Parts (ví dụ: chưa được hải quan thông quan, chậm trễ do thiên tai ...).
  • Các trường hợp ngoại lệ khác ngoài tầm kiểm soát của sinaparts.com

* Bạn có thể gửi yêu cầu hoàn lại tiền trong vòng 15 ngày sau khi thời hạn giao hàng được đảm bảo (90 ngày) đã hết. Bạn có thể làm điều đó bằng cách gửi tin nhắn tại Trang Liên Hệ

Nếu bạn được chấp thuận cho khoản tiền hoàn lại, thì khoản tiền hoàn lại của bạn sẽ được xử lý và một khoản tín dụng sẽ tự động được áp dụng cho thẻ tín dụng hoặc phương thức thanh toán ban đầu của bạn, trong vòng 14 ngày.

Đổi Trả Hàng

Nếu vì bất kỳ lý do gì bạn muốn đổi sản phẩm của mình, có thể lấy một cỡ quần áo khác. Bạn phải liên hệ với chúng tôi trước và chúng tôi sẽ hướng dẫn bạn thực hiện các bước.

Vui lòng không gửi lại giao dịch mua của bạn cho chúng tôi trừ khi chúng tôi cho phép bạn làm như vậy.

LARGE ORDER DEALS

Wholesale

Thank you for your interest doing business with us!

If you would like to get a discounted price for your large purchase orders, fill in the required blanks along with your email address, the product Item ID # and/or the link of the item that you want to order, item quantity (minimum of 30 pieces), shipping country and payment method is required. We will contact you with a discounted price as soon as we receive your inquiry.

Same seller