Launch X431 X PROG 3 Auto Key Programming Xprog3 Immobilizer Programmer Read Write Car Key Programmer For X431 V PRO3S+ PADV/VII

LAUNCH X431 XPROG 3 Features

1. Compatible with X-431 series diagnostic scanners,X-PROG 3 enables reading/writing EEPROM, on-board MCU and FOR BMW CAS4+/FEM chips, FOR Mercedes-Benz infrared keys, generating special keys, reading FOR BMW engine INS code.

2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

LAUNCH X431 X PROG 3 Advantages

1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

X-PROG 3 Powerful Functions List:

EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Au-di 5th generation steering column chip reading and writing
Volks-wagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volks-wagen fourth-generation UDS engine replacement
Boot mode read engine
Volks-wagen MQB engine, gearbox, steering column lock replacement
Volks-wagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading

LAUNCH X431 X-PROG 3 Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the For BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

LAUNCH X431 X prog 3 Compatible with :

X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

LAUNCH X431 X prog 3 Supports Car List :

For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM

It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates

Atmel NSC

Fujitsu Philips

Infineon Renesas M16

MC68HC05 Renesas M32

MC68HC08 Renesas M32R

MC68HC11 Renesas R32C

MC68HC12 Renesas R8C

MediaTek Renesas V850 SPI

MicroChip Renesas V850 UART

Nordic Samsung

ST SiLabs

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.

4Wire GI Numonyx SST

Adesto GigaDevice OKI ST

AKM Grundig ONSemi Toshiba

Altera HOLTEK Other Winbond

Amic Hynix PCT Xicor

Atmel I2C Philips xUSSR

BOSCH ITT Pioneer YMC

Catalyst KHIC PMC Spansion

Chingis Macronix Ramtron SPI

Dallas/Maxim MicroChip Rohm NEC

EON Micron Samsung NSC

ESMT MicroWire Seiko Ford

EXEL Mitsubishi Siemens Fujitsu

Fairchild Motorola Sony

X-PROG3 Dtails&Functions:

1. Car key slot --------- Place the car key to perform the key matching function

2.DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.

3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function

4. Car key chip hole --------- Place the key chip to perform key matching

5. Status indicator --------- Power indicator

6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data

7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations

8.DC12V power supply --------- Connect DC12 power supply

9.DB15 --------- Connect the main wiring

How to use X-PROG3 to read and write data?

Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

LAUNCH X431 x-PROG 3 Specification :

Input Power: DC12V

Working CurrentMax: 500mA

Power Consumption: 5W

Storage Temperature: -20℃~70℃

Working Temperature: 0℃~50℃

real shot: