KONNWEI KW208 Automotive Battery Tester Analyzer For Car 12V Battery Checker 100 to 2000 cca Battery Waveform Car Battery Tool

Main features of KONNWEI KW208:

1.[Multi-Functions]：KW208 Battery Tester functions includes Battery test, Cranking test, Charging test functions. It support cranking and charging system test also alternator and starter test. Mainly targeted to analyze the battery healthy status. It directly detects whether the battery is good or bad, and present suggested solutions.

2.[Convenience] : Plug and Play, no internal batteries required. KW208 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy!

3.[ Multiple Battery Types Test & Strong Capacity]：KW208 can test all 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. Test standards include most battery standards in the world, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE

4.[Efficiency & Safety]：Using advanced conductive technology, it can directly display the high accuracy results of vehicle info. Deigned with polarity reverse connection protection. It will not damage the device or affect the car or battery.

5.[Multi-language Support]：8 Languages are available.Available in English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese.

6. [>99.5% Accuracy]:Thanks to KW208’s powerful STM-32 chip, it provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers.


7. [Useful Feedback Results ]Provide reliable results within seconds, accurancy up to 99.9%; display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly.

8.[Professional]：Suitable for automobile factory, garage, auto battery manufacturer, and DIY enthusiasts, etc.

Functions :

1.System voltage 12 Volts and Voltage test

2.Test Result Good, Recharge or Replace

3.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mΩ) and Life in percentage (%)

4.Cranking system and Charging system

5.Record and re-play battery data.

6.Battery test, cranking test, charging test and other additional functions.

7.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,DIN and IEC are supported

KONNWEI KW208 Support all 12V kind Batteries

Car, SUV, boat, light Pickup trucks, motorcycle

Start test

Check the basic health of the battery
• CCA
• Battery Voltage
• Battery Internal Resistance
• Battery Power

It mainly analyzes the health status of the car battery, calculates the actual cold start capacity of the battery, and judges the aging degree of the battery, so as to provide a reliable analysis basis for the inspection and maintenance of the car battery.

Charging Test

Whether the charging data is abnormal
• Turn off all equipment and set the engine at 2500-3000PRM, then click test

Let you know the output voltage of the generator ,the rectifier diode and charging current.Moreover, it analyze the state of the charging system and battery through the above data, provide you with an accuraye charing system test

Cranking Test

Whether the battery is normal when the car starts
• Starting voltage
• Detection time
• Whether the startup state is normal

It is mainly to detect and analyze the starter motor of the car, and detect the actual starting current and starting voltage of the starter motor, so that it can be judged whether the starter motor is normal.

The amplifier circuit adopts high precision chip and is calibrated by profession instrument.

Thanks to KW208’s powerful STM-32 chip, >99.5% Accuracy. It provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers.

Multi-language Support

Support 8 Languages : English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese

KW208 Car Battery Tester Application

Use a test a wide range of 12v batteries(Starting{SLI},Deep Cycled and Marine) of Wet(Flooded),VRLA or Maintenance Free (MF),Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.

KONNWEI KW208 support measure standards:

Use a test a wide range of 12v batteries(Starting{SLI},Deep Cycled and Marine) of Wet(Flooded),VRLA or Maintenance Free (MF),Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.
Standard --- Description --- (Testing Range )
CCA、BCI、CA、MCA、JIS、DIN、IEC、EN、SAE、GB

CCA --- Cold Cranking Amps, as specified by SAE. The most common rating for cranking batteries at 0°F (-18°C).--- (100-1100 )

CA --- Cranking Amps standard. The effective starting current value at 0°C (32°F). --- ( 100-1100 )

MCA --- Marine Cranking Amps standard. The effective starting current value at 0°C (32°F). --- (100-1100 )

JIS --- Japanese Industry Standard, shown on a battery as a combination of numbers and letters.--- ( 26A17--245H52 )

DIN --- Deutsche Industrie-Norm. --- ( 100-1100 )

IEC --- International Electro technical Commission. --- ( 100-1100 )

EN --- Europa-Norm --- ( 100-1100 )

SAE --- Society of Automotive Engineers --- ( 100-1100 )

BCI---American Battery Council International ( Publishes Automotive Battery Standards)

Three Test Operation Steps of KW208 Car Battery Tester

Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole.

Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds.

Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine. Test completed.

Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds, then press OK. Test completed.

Feedback & Warranty

If you are satisfied with our products, please light up 5 stars and share your review. Please do not give bad reviews or dispute easily. If you are not satisfied with our products, please contact our customer service staff first. We will serve you to your satisfaction.

1-year after-sales service guarantee, remote assistance from a professional engineer team. Free lifetime updates. No reason to return for a refund within 7 days

Packing List

1*KW208 Battery Tester
1*Instruction Manual
1*Safe packing box