Foxwell NT726 OBD2 Scanner All System Diagnostic Scan Tool with ABS Oil Reset EPB DPF Injector SAS TPMS Code Reader Free Update

Why Choose FOXWELL NT726?

▶▶All System Diagnostic Scanner:

FOXWELL NT726 car code reader will read codes, clear fault codes, display live data stream, and retrieve vehicle information on all available control modules, such as ABS, SRS, Transmission, , engine, suspension system, Body, Power strain, Chassis and etc.

▶▶ 8 Resets Service+ABS Bleeding Scan Tool :

ABS Bleeding, EPB Reset, Oil Reset, SAS Reset, Injector Coding,TPMS Reset,Throttle Relearn, D-P-F Regen.

▶▶Multiple Language Options:

Korea, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian, Hungarian, Greek

▶▶BEST HARDWARE :

Android 9.0 System + 4000mAh Built-in Battery + 32GB SSD Hard Drive + 1GB DDR4 Memory + One-Click Update + NO IP Limited + Print/Share Vehicle Health Report + Data Stream Record and Playback.

▶▶4 in 1 Live Date:

NT726 equipped with 1080p 5.5-inch LCD screen graphically to show live data, it allows you to view two or more parameter maps to confirm the location of the fault quickly and accurately.

▶▶Health report:

The detailed report reveals the exact nature of the problem , You can transfer the report you want via E-mail/ Bluetooth/ Printer

▶▶Battery Voltage Monitor:

One-click to check the real-time health of your car battery with a graph. Monitor the battery life to replace or change it timely manner to get safe driving. (The voltage is normal when it's in a certain range of values.)

▶▶Feedback Submit:

Touching the icon on the top to access the submit page. Describe your problem with the attachments like report files or pictures to get a professional response and faster troubleshooting.

▶▶ Update:

One Touch Update Via WiFi, Lifetime Free Update

FOXWELL NT726 Support 8 Resets Service:

1. ABS Bleeding:

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.Whenever you change a part of the brake system, you will need to bleed the brake system afterward.

2.Oil Light Reset:

reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine.So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate. Your driving safety also gets ensuring.

3.SAS Calibration:

(Steering Angle Sensor Calibration) Steering wheel angle sensor, a component of vehicle stability control system, is mainly installed in the direction column below the steering wheel.It helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor calibration.

4.EPB:

Electronic Parking Brake allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening, and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.

5.TPMS Reset:

(Tire Pressure System Reset ) When the car tire pressure failure indicator light is on,low or leaking tire pressure, replacement or installation of TPMS equipment, replacement of tires, damage to the tire pressure sensor etc. need to do TPMS reset after maintenance.TPMS Service: Looks up the tire sensor IDs from the vehicle’s ECU, and performs TPMS sensor relearn procedures after tire sensors are replaced.

6.Injector Coding :

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

7.Throttle Body Relearn:

Throttle matching is to initialize the car's throttle actuators, so that the learning value of the ECU returns to the initial state, so as to more accurately control and adjust the throttle (or idle speed motor) action to regulate the intake the amount.

8.DPF Regeneration:

(Diesel Particulate Filter Regeneration) lets you perform the forced regen cleaning to clear the blockage through continuous burning of the particulates captured in the D-P-F filter. When a regeneration cycle is completed, the D-P-F light automatically goes off.