Autel MaxiCOM MK808TS PRO Car Diagnostic Scanner Automotive Scan Tool With Advanced TPMS Diagnost Oil Reset/EPB/BMS/SAS/DPF/IMMO

Autel MaxiCOM MK808TS PRO With 2in1 MX-Sensor Complete TPMS and Sensor Programming TPMS Scanner All Systems Diagnostic Tool

MK808TS PRO=MK808BT+TS601+4PCS 2IN1 MX-Sensor

Autel MK808TS PPRO performs a variety of OBD2 functions and advanced services functions. As an upgraded model of MK808BT, it contains all the diagnostic functionalities and masterly integrates the functions of professional TPMS tool TS601 to perform complete TPMS functions, and equipped with 4PCS 2IN1 MX-Sensor to meet the daily testing needs. What might surprise you is that MK808TS PRO contains all the functions of an advanced diagnostic scanner and a master TPMS tool but at a far more affordable cost than purchasing two devices.

2022 Newest Release Functions:

1. Bi-Directional Control(Active Test):

Bi-Directional Control(Active Test) can perform real active test that can send commands to the vehicle’s ECU to drive the actuators to work, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues.

Note: Functions NOT universal, please send VIN(17 digits),car makes, model, year to check compatibility before purchase.

2. Battery Test Capability (BT506 required):

Use with Autel BT506 battery tester to perform professional cranking/ charging system test and In-Vehicle & Out-of Vehicle Battery Test, and with over 95% accuracy result with advanced adaptive condutive technology, which is far more accurate than the 50% of market avreage accuracy.

Autel automotive battery test tool BT506 can test all 6V and 12V 100-2000CCA batteries including the most regular Flooded, AGM, AGM Spiral, EFB and GEL batteries, and compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA standards.

3. Compatible with Autel MV108/MV105 Inspection Camera (not included):

This is a very pratical and useful functions, which allows you to have a futher wear situation check on your car engine/transmission,etc internal structure, to avoid further damage or avoid potential dangerous driving.

4. Supports FCA "Auto Auth" gateway for 2018 and newer FCA cars. Chrysler, JEEP, Dodge, Fiat are currently supported. Maserati is still in development.

Complete TPMS Services:

The MK808TS PRO scanner can activate all known OEM TPMS sensors and check TPMS health status by reading tire pressure and temperature, sensor ID, battery condition, and so on info. The scanner contains 3000+ relearn procedures which allows it accurately responds to the relearn issues of specific models, helps you effortlessly rematch the replaced sensors, and turns off the faulty light.

● Advanced TPMS diagnostics with DTC description
● One step for complete TPMS health check
● Activate 98% of all known TPMS sensors
● 4 modes MX- sensor program
● 3 modes TPMS relearn
● Batch program up 20 MX-sensor
● TPMS by OEM Part No
● On-screen 3000+ relearn procedures

Advanced MX-Sensors Programming:

For mechanics in repair shops or professional car repairers, Autel MK808TS and MX-Sensor mean that you don’t need to buy original sensors of a variety of car brands and models. MX-Sensors being programmed by scanner MK808TS PRO can replace 98% of OE sensors. There are 4 ways available for programming:

1.Copy by Activation: Once the sensors mounted on the vehicle has been triggered and the sensor information displayed on the tool, the Copy by Activation can use to program a new MX-Sensor.

2.Copy by OBD: By using this function, the tablet will program the sensor IDs retrieved from the ECU of the test vehicle to the new MX-Sensors.

3.Copy by Input: The Copy by Input allows users to program a new MX-Sensor with the ID of an original TPMS sensor.

4.Auto Create: Automatically create a random sensor ID to program a new MX-Sensor. There is no need to activate the original sensor or retrieve the original sensor IDs. The new ID of the sensor will have to be relearned to the TPMS ECU.

TPMS Retrofitting:

This Autel auto diagnostic tool MK808TS possesses TPMS retrofitting function. This function helps you to retrofit the TPMS module into the vehicles that did not have this module before with just a few clicks, and guides you to program, install tire pressure receiver and sensor, and finish the matching process. This function helps car owners to monitor tire pressure better and ensure their driving safety.

Here is the specific step for your reference:

Step 1: Back up the original vehicle data;
Step 2: Code the Autel TPMS module;
Step 3: Set up the Autel TPMS module on the vehicle following the instruction;
Step 4: Program the Autel tire sensors (Note: For the OE tire sensors, this step can be skipped);
Step 5: Activate the Autel tire sensors or OE sensors;
Step 6: Relearn the sensors with on-board TPMS module.

OE-Full Systems Diagnosis:

To help you root out the problem hidden underneath the hood, TPMS scanner MK808TS PRO has packed with OE-level full-system diagnostic which can dive into every corner of on-board system and present everything about your ride with a specific report. Comparing with other competitors, MK808TS can access more system information (such as PCM, ECM, EPS, PDM, BCM, TPM, etc.) and are compatible with a wider range of models.

● Read/clear codes for all available electronic systems
● Display live data in text, graph & analog for easy data review
● Supports all 10 test modes of the latest J1979 OBD II test specs
● Turn off warning lights
● Enhanced OBDII Mode 6

28+ Special Service Functions:

To meet the maintenance needs of the auto repair shop masters/technicians/mechanics to the greatest extent, Autel endows the scanner MK808TS with 28 OE-level special services, which cover 90% of the cars on the market.

● Oil Reset: It will let you turn off the oil light reset and service mileage after the oil change.

● EPB: This feature will help reset the brake pad after replacing the brake pad. It diagnoses other electronic parking brake-related problems in your car.

● SAS: It helps read and erase the record of the old steering angle sensor and overwrite it with a new one.

● BMS: It helps reset a battery after you have replaced it.

● IMMO (Anti-Theft Matching): This feature helps protect your car from being stolen. It resets the data if the key is lost and programs the replacement key fob.

● Injector Service: Reads injector-related problems and adjusts them.

● DPF: This function allows removing PM from the DPF by burning the collected black smoke via the exhaust heating method.

Autel scanner MK808TS PRO also supports other special services such as Adjust A/F, Windows Calibration, Cylinder Service, Trans Adaption, CHG Tire Size, Language Change, Odometer, Headlamp, Calibration, and so on.

4 Methods for Vehicle Identification:

1.Auto VIN Scan: The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.

2.Manual VIN Input: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.

3.Automatic Selection: The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.

4.Manual Selection: When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.

Immobilizer Service:

The IMMO service of MK808TS pro is an anti-theft mechanism that disables the lost vehicle keys and programs the replacement key fob. One or more replacement key fob(s) can be programmed according to your needs.

Note: The IMMO Service Function is suitable for vehicles that support Anti-theft system, not available for Audi, Benz, BMW, etc. that come with a superior IMMO system.

Globe Vehicle Coverage:

Autel diagnostic scanner MK808TS PRO is compatible with most after-1996 US-based vehicles, and after-2000 EU-based and Asia-based vehicles. Autel MK808TS PRO covers more than 80 US, Asian and European vehicle makes and 10000+ vehicle brands.

Europe: For Abarth, Alfa-Romeo, Alpina, AstonMartin, Audi, Bentley, Benz, BMW, Citroen, Dacia, Ferrari, Fiat, Jaguar, Lamborghini, Lancia, LandRover, Lotus, Maserati, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Rolls-Royce, SAAB, Skoda, Smart, Volvo, Volkswagen...

Asia: For Acura, Daewoo, Holden, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, SsangYong, Subaru, Suzuki, Toyota, BYD, ChangAn, Chery, DFM, FAW, Foton, Geely, GreatWall, Haval, JAC, Lifan, Luxgen, MG, Zotye...

USA: For Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Hummer, Jeep, Lincoln, Mercury, Oldsmobile, Pontiac, Saturn, Tesla...

Australian: AU-Ford, Holden

Best Choice for :Technician , advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, home mechanic, DIY beginner, automotive student, weekend DIY.

Advanced Hardware:

● Autel diagnostic scanner MaxiCOM MK808TS PRO scanner is one Vehicles Diagnostic tablet that runs on Android™ 4.4.4, KitKat with a 1.5GHZ Cortex-A9 Processor to make sure the smooth diagnostic operation.

● 7-Inch 1024×600 Resolution Touchscreen of Autel scanner MK808TS PRO offers crystal display to offer users great visual experiences.

● MK808TS PRO diagnostic tablet loads with 5000 mAh Lithium-Polymer Battery for 7 hours of continuous use.

● 64GB on-board ROM extended memory makes the diagnostics on high performance.

● MaxiVCI Mini is equipped for wirelessly vehicle data transmission via the fast and reliable Bluetooth 2.1 EDR.

● 4PCS 2IN1 TPMS MX-Sensor Suitable for 98% vehicles.

● Support Multi-Language: English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian.

More Useful Functions:

1.Shop Manager: For you to manage workshop information, customer information, vehicle repair records.

2.Data manager: Record your activity on the scanner, and when you face some problems, you can send the data to us and our engineers could help you resolve the issue.

3.The Remote Assistance: Enables our engineers or your peers to remote control the scanner and conducts remote diagnostics.

4.Online Wi-Fi Update: Automatic system and software updates with real-time push message notifications via Wi-Fi.

5. Printing Service: Connect to PC to print the diagnostic result.

MK808TS PRO Package List:

1 X MK808TS PRO tablet
1 x USB Cable (for charging)
1 x USB Cable (for test)
1 x MaxiVCI Mini
1 x USB External Power Adapter
1 x User Manual
1 x Quick Reference Guide
1 x Carry case
4 x 2IN1 MX-SENSOR