ANCEL S3000 Smoke Leak Detector EVAP Smoke Machine Diagnostic Tool Vacuum Tester Fuel Pipe Leakage Locator for Car Motorcycle

ANCEL S3000 Car Smoke Leak Detector EVAP Smoke Machine Diagnostic Tool Car Fuel Pipe Leak Detector Tester Auto Vacuum Tester

With ANCEL S3000 EVAP smoke machine, you can greatly reduce the troubleshooting duration for vacuum leaks and other problems.

Smoke coming out of the electrical or engine components is always a bad sign, especially when it’s detected in your car, as there're lots of components in a car system, it is very difficult to accurately diagnose the root cause of the problem, There’s nothing more frustrating than trying to track down a pesky vacuum leak without the right tools. You don’t want to spend a ton of money on a mechanic. thus, ANCEL S3000 Automotive Smoke Machine is one of the most useful diagnostic tools you must have to detect the leaks.

Full System Diagnostics, Don't Miss Any Leaks.

▶Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.

▶Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.

▶Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.

▶Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough

▶Turbo Test: the leakage of coolant would cause the engine to report high water temperature.

▶Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.

▶EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling

▶Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.

Smoke Machine Leak Status Indication

Quick vehicle leak diagnosis by pressure display

? NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.

? Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.

?Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.

Overheat & Anti-Frost Protection

For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehicles, ATVS,light trucks and speedboats,Suitable for all car models.

● Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.

● Anti-frost Protection
The device can also work normally at -20℃.

Independent Switch Control Design

Air mode: Independent controlled built-air pump.

Smoke mode: Independent controlled smoke generator.

Viewable Pressure Gauge

The Automotive EVAP Smoke Machine equipped with a liquid filled pressure gauge. By observing the change of pressure gauge, the leakge situation is clear at a glance.

Adjustable Air Flow
Output Flow: <6 L/min
Air flow meter with adjustable button, easy to control the smoke effect.

Fast Smoke Output
This machine built-in air compressor, with superior wick and heating element. It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly.

Wide Range of Applications

Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault.

How to Use the Automotive Fuel Smoke Leak Detector?

Notice before Leak Test: Turn OFF the Ignition of Your Vehicle

● Assemble the smoke machine with delivery hose, power socket and hook.

● Unscrew the oil filler cap and add test oil.(Pure #5 white oil is the best choice if available)

● Disconnect the pipes that need to be connected with the smoke leak detector.

● Connect your car smoke machine’s power cord to 12V vehicle battery (red clip to battery positive and black clip to a good ground, then the Power LED would be ON, if else check the power supply)

● Introduce the smoke delivery hose into the pipeline to be tested via the Adapter Cone.

● Press Air Control Switch, wait for seconds until the system is pressurized, check the Pressure Gauge & Flow Meter reading for leak status. Turn on the smoke generator, adjust the smoke amount to suitable amount so you can locate the leak position quickly.

● The leak can be judged according to where the smoke appears.

ANCEL S3000 smoke machine automotive Parameter

● Output pressure:7-12 PSI

● Output flow:＜6L/min

● Power supply: DC12V,vehicle battery

● Air source: built-in

● Test oil capacity:10ml-20ml

● Material:Iron

● Length of Power Cord: 2.5Meters

● Length of Smoke Hose: 2.5Meters

● Test Oil:Mineral Oil or Baby Oil(oil not include)

● Multi Protections:Oil Outlet, Over-Heat and Over-Load Protection

● Machine Size:13cm x 8.5cm x 18.5cm

● Package Weight: 2.3kg/5 lb

● Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.

● Velcro Strap For collection of the smoke delivery hose, and power cord before storage.

● Pressure Gauge: Displays the output pressure of the machine or show the real time pressure of the system been testing.

● Air Flow Meter: Provide a quick visual indication of the amount of air/smoke passing through the system being tested.

● Flow Dial: Easy to control the smoke and air amount, determine the exact location of the leak easily and quickly

● Oil Level Gauge: Allow you to accurately control the test oil volume.
Smoke Control: After pressing this switch, the power indicator light is on to indicate that the power supply is normal.

● Air Control: Press the AIR MODE, pump starts working, only after this, you may press and start the SMOKE MODE.

ANCEL S3000 Packing Lists

1x ANCEL S3000 Main Unit

1x Power Cord: To offer connection from the unit to the automobile battery, in order to drive the unit.

1x Funnel: Assistance method for smoke oil refill, to prevent pour oil to the unit surface.

1x Hook up: To hang the smoke machine in the car

1x User Manual: Detailed descriptions about how to use the smoke machine automotive.

1x Intake Bladder: To fit the intake and exhaust, seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape.

1x Adapter Cone: To fit the intake and exhaust, seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation.

1x Replacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder.

1x Smoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.

Difference between S1000, S2000 and S3000

the function of the Pressure Gauge: We can directly determine whether the pipeline is leaking through the value of the pressure gauge. If the pressure gauge is less than 0.5bar, it can be judged that there is a leak. The smaller the pressure, the greater the leak. At this time, you can find the leak through the smoke leak. Point and fix it in time

The function of Flow Indication: The flow meter is an indicator to intuitively judge whether there is a leak and the size of the leak. When the flow indicator bead is at the bottom of D, it indicates that the pipe is good and there is no leakage. The higher the bead position, the greater the leakage.