High Pressure Snow Foam Lance for Karcher K Series Soap Foamer Adjustable Foam Nozzle Professional Foam Generator Car Washer

It makes soft fluffy snow foam, fun and simply

It works with any pressure washers, small and big are all working perfectly

It saves water, It's eco-friendly

It's touch-less car wash, it saves your time and energy

The thick foam suds melt rods and dirty on paint, thus it reduces swirl marks and scratches

The bottle surface has a measurement guide line. Easy to adjust the mixing ratio

You can rotate the nozzle to change the spray pattern

The dial on the top to control the foam mixture

Specification:

Capacity of bottle: 1000ml (1L)

Pressure Range: 100 bar - 200 bar (1400psi - 3000 psi)

Durability: 10 Years

Warranty: 1 Year (except the mesh filter inside)

Construction Material: Solid Brass, Resistant Nylon, & HDPE bottle

Maximum Water Temperature: 60° C

Chemical Resistant: Yes

Foam Consumption Adjustable: Yes

Spray Width Adjustable: Yes

Size: about 27 * 16 mm/ 1.06 * 0.63 inches( 1 cm = 0.394 in)

How To Use:

1.Put the shampoo or wash powder into the bottle.

2.Fill the water into bottle,make sure the proportion of shampoo and water is correct!

You'd better use warm water(not hot) to help make more foam.

3. Shake the foam lance to make the shampoo Dissolve and more foam.

4. Connect the bottle to foam lance unit.

5. Connect the foam lance to car washer gun and then you can play it!

Packing List:

1x foam lance with adatptor for car wash cleaning machine..

1x PA bottle (1L)

1x User manual paper

1x Straw

Please carefully choose the type of what you need:

·M1：for Lavor (ARAL, BOLT,SMART,INDIE,FORCE,SPLIT,VERTIGO,IKON,VAX COMET and others)、Parkside Foreman Sterwins Hitachi Sorokin Copokin                        Hammer Elitech Champion

M2：for some Nilfisk and Anlu

 M3：for Karcher HD Series

 M4:  for Bosch Aquatak AQT 33-10, 33-11, 35-12, 37-13, 40-12, 42-13, 45-14 (  Normally After 2013) . Also For B&D, Skil 0760/Makita/AR Blue

  M5:  for Italian Nilfisk/KEW/ALTO WAP CALM

  M6:  for some old model of Bosch Washer. For Old Bosch Aquatak 10,100,100 Plus, ESO,110,110 Plus,115 Plus,1200 Plus (Normally before 2013)

M7:  for Karcher K adapter, K2-K7 (material Pure copper)

  M8:  for Nilfisk Gerni Series Car washer cleaning machine

  M9:  for Karcher K series K2 K3 K4 K5 K6 K7 (material is copper + Plastic)

  M10: 1/4" Quick Release, about 12 mm/ 0.47 inches

Features:

· It makes soft fluffy snow foam, fun and simply, suds melt rods and dirty on paint, thus it reduces swirl marks and scratches.

· It works with any pressure washers, small and big are all working perfectly

· It saves water, It's eco-friendly.

· Touch-less car wash, saves your time and energy.

· The bottle surface has a measurement guide line. Easy to adjust the mixing ratio

· You can rotate the nozzle to change the spray pattern.

· The dial on the top to control the foam mixture.

Specifications:

· Pressure Range: 100 bar - 200 bar (1400psi - 3000 psi)

· Durability: 10 Years

· Warranty: 1 Year (except the mesh filter inside)

· Capacity of bottle: 1000ml (1L)

· Construction Material: Solid Brass, Resistant Nylon, & HDPE bottle

· Maximum Water Temperature: 60° C

· Chemical Resistant: Yes

· Foam Consumption Adjustable: Yes

· Spray Width Adjustable: Yes

· Size: about 27 * 16 mm/ 1.06 * 0.63 inches( 1 cm = 0.394 in)

How To Use:

· Put PTFE tape on the brass tube (two threads), each thread needs 50cm PTFE tape.

· Put the fitting/adapter with brass tube and suction tube on foam lance unit.

· Fill fluid bottle with desired amount of shampoo.

· Fill fluid bottle with water (for best results, use warm water, 20% shampoo +80% water is suggested).

· Shake the fluid bottle to mix the shampoo with water thoroughly.

· Attach fluid bottle to foam lance unit.

· Attach the fitting/adapter to pressure washer gun, and you can start playing with it.